- Avg Speed - 21.0 mph
- Max Speed - 23.7 mph
- Avg Power - 210 watts
- Peak Power - 385 watts
Tuesday, May 12, 2009
Start of the season indoor ITT
Now that my knee seems to feel good and I've managed some good paces on weekend group rides, I felt as if it was a good time to do a start of the season ITT. Doing the test indoors on the computrainer gives a good indication of fitness and power eliminating effects from the bike aerodynamics and outdoor elements. On the trainer I chose the Computrainer 10 mile TT course. I believe it is one of the default courses that RacermateInc uses in its 20% performance increase money back guarantee. The course is basically a rolling course with not greater than 3% gradients.
Sunday, May 10, 2009
New Goodies!!
So the first item was actually purchased during my bike fit. It is the infamous ISM Adamo saddle. For anyone doing triathlons or TTs that has problems with seats putting pains where there really shouldn't be pains, these seats are for you. Basically, its design puts the pressure right back on your sit bones where it is supposed to be. There are several models available. Each has different amounts of padding so its just a matter of finding the "right" one.

The next item was a recommendation by the fitter. I needed to lengthen the front end of my bike. I did this by replacing the standard Vision TT aerobars which were 250mm in length with the Profile Design T2+ S-Bend aerobar clip-on extensions. Since I was changing the bars, I also changed the light gray shifter and brake cables. After a week of adjustments, I finally have what I feel is a manageable setup. Once interesting thing was I routed the shifter cables through the plastic ends of the aerobar extensions. You can see these barely in the photo. I outfitted them with Zipp bar tape which I am pleased with.

One of the problems I ran into was where to mount my computer. The bars are fairly narrow and doesn't give much space. The computer I have, a Garmin Forerunner 301, is a wide computer and will barely fit between the bars. Off I went to Home Depot. I came out with a 3/4" curved PVC pipe. After a little bit of dremeling, I came up with the following mounting bracket:

The PVC is dremeled so it has curved ends to fit between the bars yet rises up slightly between them. The gray PVC was then covered in black electrical tape to semi-permanently mount it between the bar ends. The computer mounting bracket is then zip tied to the PVC. Here is a final shot showing how the actual computer fits in between my arms.

The last goody I got was related to running. If you have been following my blog, you know that I've had recent knee problems that have kept me from doing pretty much anything. Well, I finally decided that after 500 miles of biking, I should make an attempt to run. I started slow doing 2 minutes walking at 4mph and 2 minutes running at 6.5 mph. Not blazing at all. One big thing that I noticed was that if I accidentally over-extended my stride, my bad knee would experience sharp pains. I came to the realization that my running form may be what caused my injuries in the first place. I may have had a double whammy of overstriding and a major heel striker. In an attempt to fix this, I bought into the marketing hype of a shoe company. No its not a major player... its Newton Running. So I am using their 30 day "free trial" period and bought the following:

The shoes are their "Gravity" cushion trainer model. The shoes are very interesting concept. They are designed to promote forefoot/midfoot running form. The heel material is less, they have a more flexible forefoot, and they have "lugs" underneath the midsole. The lugs are supposed to be some type of energy retention system. Whether these lugs work or not have yet to be seen, but I'm not getting my hopes up. So after I got home I took them for their maiden voyage. Another 2 min walk, 2 min run session at 4mph/6.5mph. What I noticed right away was the shoes wanting to "keep me on my toes". Its a good thing I was only running in 2 minute intervals, because I don't think I could go further. Two observations were made after the 20 minutes of running. My cadence improved 10 steps per minute from 80 to 90. Changing to this running style is going to take some time. In the end, I didn't once get a jolt of pain up in my knee. I attribute this to not heel striking and letting the knee try and absorb the shock, this was since the foot was doing most of the shock absorption. Over the next month, updates will continually be made on these shoes and my progress in a gait change.

The next item was a recommendation by the fitter. I needed to lengthen the front end of my bike. I did this by replacing the standard Vision TT aerobars which were 250mm in length with the Profile Design T2+ S-Bend aerobar clip-on extensions. Since I was changing the bars, I also changed the light gray shifter and brake cables. After a week of adjustments, I finally have what I feel is a manageable setup. Once interesting thing was I routed the shifter cables through the plastic ends of the aerobar extensions. You can see these barely in the photo. I outfitted them with Zipp bar tape which I am pleased with.

One of the problems I ran into was where to mount my computer. The bars are fairly narrow and doesn't give much space. The computer I have, a Garmin Forerunner 301, is a wide computer and will barely fit between the bars. Off I went to Home Depot. I came out with a 3/4" curved PVC pipe. After a little bit of dremeling, I came up with the following mounting bracket:

The PVC is dremeled so it has curved ends to fit between the bars yet rises up slightly between them. The gray PVC was then covered in black electrical tape to semi-permanently mount it between the bar ends. The computer mounting bracket is then zip tied to the PVC. Here is a final shot showing how the actual computer fits in between my arms.

The last goody I got was related to running. If you have been following my blog, you know that I've had recent knee problems that have kept me from doing pretty much anything. Well, I finally decided that after 500 miles of biking, I should make an attempt to run. I started slow doing 2 minutes walking at 4mph and 2 minutes running at 6.5 mph. Not blazing at all. One big thing that I noticed was that if I accidentally over-extended my stride, my bad knee would experience sharp pains. I came to the realization that my running form may be what caused my injuries in the first place. I may have had a double whammy of overstriding and a major heel striker. In an attempt to fix this, I bought into the marketing hype of a shoe company. No its not a major player... its Newton Running. So I am using their 30 day "free trial" period and bought the following:

The shoes are their "Gravity" cushion trainer model. The shoes are very interesting concept. They are designed to promote forefoot/midfoot running form. The heel material is less, they have a more flexible forefoot, and they have "lugs" underneath the midsole. The lugs are supposed to be some type of energy retention system. Whether these lugs work or not have yet to be seen, but I'm not getting my hopes up. So after I got home I took them for their maiden voyage. Another 2 min walk, 2 min run session at 4mph/6.5mph. What I noticed right away was the shoes wanting to "keep me on my toes". Its a good thing I was only running in 2 minute intervals, because I don't think I could go further. Two observations were made after the 20 minutes of running. My cadence improved 10 steps per minute from 80 to 90. Changing to this running style is going to take some time. In the end, I didn't once get a jolt of pain up in my knee. I attribute this to not heel striking and letting the knee try and absorb the shock, this was since the foot was doing most of the shock absorption. Over the next month, updates will continually be made on these shoes and my progress in a gait change.
Sunday, April 26, 2009
Great Weather, Great Ride!
After a terrible week of work and no biking it was finally time to get outdoors and pedal. The weather cooperated with temps into the upper 80s with no wind.
Packed up the bike and headed for the weekly group ride at Village Bicycles. Met up with a friend at work. They pulled out the maps and had planned for a 68 mile ride. The groups got setup and I thought I was going to average in the 15-18mph range. That would have been fine. Off we went when my friend said that we should check out who is in the lead group. So off we went sprinting to play catch up.
50 miles later, and I was in a group of 4 including the shop owner and one of his employees. Both of whom are doing the Race Across America. I cracked in the end... But I averaged 19.8mph. Not bad for an early spring ride coming off of knee injury!
Speaking of the knee injury, the shims that were added to my cleat worked wonders. No knee pain at all... no ankle roll... no numb foot on the outside. The money spent on the fitting was well spent.
I can't wait till Tuesday's group ride!!!
Packed up the bike and headed for the weekly group ride at Village Bicycles. Met up with a friend at work. They pulled out the maps and had planned for a 68 mile ride. The groups got setup and I thought I was going to average in the 15-18mph range. That would have been fine. Off we went when my friend said that we should check out who is in the lead group. So off we went sprinting to play catch up.
50 miles later, and I was in a group of 4 including the shop owner and one of his employees. Both of whom are doing the Race Across America. I cracked in the end... But I averaged 19.8mph. Not bad for an early spring ride coming off of knee injury!
Speaking of the knee injury, the shims that were added to my cleat worked wonders. No knee pain at all... no ankle roll... no numb foot on the outside. The money spent on the fitting was well spent.
I can't wait till Tuesday's group ride!!!
Tri-Bike Fitting at TTBikeFit
As a result of my recent knee injuries, I decided to spend some money and get a proper bike and cleat fit by someone who knows what he is doing. After looking at two places, I decided to visit Todd Kenyon. at:
http://www.ttbikefit.com/
Todd is a triathlete, a much better one than myself. His wife is a really good age grouper who has set bike split records. Todd fits some of the worlds greatest triathletes. He does everything through cameras and video analysis while you are on a computrainer.
Results:
After spending over 2 and a half hours, I had my seat actually raised a bit. I got a recommendation that I need new aerobars as the one I have are two short. Overall, he liked my actual position on the bike.
The biggest time spent was on the video analysis of my pedalling. At first, Todd was perplexed as he had never seen anything like what was happening to me. Basically, I don't stand knocked kneed, but as I pedal, at the top of the pedal stroke, my feet go out while my knees are in close to the frame. On the down stroke, the force causes most of the pressure on the outside of the foot and follows with ankle roll. This is apparent during climbing. To fix this, he added reverse shims underneath my cleat to tilt my foot. This put even pressure on my whole foot and aligned my hip, knee, ankle, and foot to my natural position.
I also had a chance to try out a ISM Adamo saddle. While not the prettiest thing, it attempts to eliminate hot spots in the appropriate areas if you know what I mean. I had a fizik saddle that everyone seems to recommend... but it just didn't work for me.
The final thing he did was measure me and provide me with a recommendation for a "dream" bike. He provides measurements in stack and reach. I have a freakishly long torso, so I need a long and low bike. The Cervelo I have fits into that category, but it is still too small. He recommended a 51 stack and a 43+ reach. This is the one I liked the best:


http://www.ttbikefit.com/
Todd is a triathlete, a much better one than myself. His wife is a really good age grouper who has set bike split records. Todd fits some of the worlds greatest triathletes. He does everything through cameras and video analysis while you are on a computrainer.
Results:
After spending over 2 and a half hours, I had my seat actually raised a bit. I got a recommendation that I need new aerobars as the one I have are two short. Overall, he liked my actual position on the bike.
The biggest time spent was on the video analysis of my pedalling. At first, Todd was perplexed as he had never seen anything like what was happening to me. Basically, I don't stand knocked kneed, but as I pedal, at the top of the pedal stroke, my feet go out while my knees are in close to the frame. On the down stroke, the force causes most of the pressure on the outside of the foot and follows with ankle roll. This is apparent during climbing. To fix this, he added reverse shims underneath my cleat to tilt my foot. This put even pressure on my whole foot and aligned my hip, knee, ankle, and foot to my natural position.
I also had a chance to try out a ISM Adamo saddle. While not the prettiest thing, it attempts to eliminate hot spots in the appropriate areas if you know what I mean. I had a fizik saddle that everyone seems to recommend... but it just didn't work for me.
The final thing he did was measure me and provide me with a recommendation for a "dream" bike. He provides measurements in stack and reach. I have a freakishly long torso, so I need a long and low bike. The Cervelo I have fits into that category, but it is still too small. He recommended a 51 stack and a 43+ reach. This is the one I liked the best:


Vacation!!!
So every year in Mar/Apr, the wifey starts complaining about needing warm weather so we tend to make a migration. This year, due to all of the deals, we took a 7 day Western Caribbean cruise that went out of Miami and did port calls at Roataan Honduras, Belize City Belize, Cozumel Mexico, and a stop at a small island in the Bahamas owned by the cruise line.
Overall impression: I would cruise again!!
The stops were so-so, the food was great (I recommend freestyle cruising), and the relaxation spa was grand! The weather was great and the seas were calm. The entertainment on-board was really good, especially the comedians.
Because we were eating so much, to not gain weight we decided to take the stairs the whole cruise. When your cabin is on deck 8 and the pool/restaurants/bars are on either deck 6 or 12/13 you end up with a lot of stairs. I also brought along my old shoes with SPD cleats and took 3 spinning classes. On two of them, the instructor made the workout more like road riding with 3 hills in one hour. I left each session leaving a puddle on the floor.
I highly recommend a cruise.
Overall impression: I would cruise again!!
The stops were so-so, the food was great (I recommend freestyle cruising), and the relaxation spa was grand! The weather was great and the seas were calm. The entertainment on-board was really good, especially the comedians.
Because we were eating so much, to not gain weight we decided to take the stairs the whole cruise. When your cabin is on deck 8 and the pool/restaurants/bars are on either deck 6 or 12/13 you end up with a lot of stairs. I also brought along my old shoes with SPD cleats and took 3 spinning classes. On two of them, the instructor made the workout more like road riding with 3 hills in one hour. I left each session leaving a puddle on the floor.
I highly recommend a cruise.
Saturday, April 4, 2009
My Glory Days
When you go cleaning out the television room, moving, and repacking stuff you sometimes find old relics. Well, I happened to come across a videotape containing me in my days as a competitive swimmer. I got through 1/2 of the tape before it disintegrated. Ahh, what a wonderful thing VCRs were. So out of request, I managed to have the originator (my father) transfer some things to a DVD. Nice!!! Indestructible media, well until I step on it and break the disc. So after playing around with ripping the disc, converting the format, extracting out races... I have the following:
Wednesday, April 1, 2009
Missed my trainer while on travel
Believe it or not, I actually missed riding on the trainer while I was away on travel for work. Taking the trainer to the next level, I found out that you can create your own course files based off of GPS data files. Luckily, Sarah has had that nice Garmin Edge 305 for awhile recording some of our favorite routes (I got the Garmin Forerunner 305 at the end of last year). So I converted a local 26 mile ride that we do that travels down most of the southern Rhode Island coastline.
Amazingly, the ride felt very accurate as far as elevation changes goes. They were spots where the grade just seemed to randomly jump by 2-3%. So unlike the road, there is no slow increase. There is probably a setting in the program to smooth the elevation changes. It will just take some playing.
Ride Results:
Distance: 22 miles
Avg mph: 20.2
Thats about all the stats. My heartrate strap wasn't being picked up and the report didn't get saved. Oh well. Still things to learn.
One very bright spot: the weather outlook for the weekend! It is supposed to be hitting 60s so the plan is to do 2 outdoor rides! Both will be group rides, so still haven't broken out the tri bike.
Amazingly, the ride felt very accurate as far as elevation changes goes. They were spots where the grade just seemed to randomly jump by 2-3%. So unlike the road, there is no slow increase. There is probably a setting in the program to smooth the elevation changes. It will just take some playing.
Ride Results:
Distance: 22 miles
Avg mph: 20.2
Thats about all the stats. My heartrate strap wasn't being picked up and the report didn't get saved. Oh well. Still things to learn.
One very bright spot: the weather outlook for the weekend! It is supposed to be hitting 60s so the plan is to do 2 outdoor rides! Both will be group rides, so still haven't broken out the tri bike.
Subscribe to:
Posts (Atom)